-- *****************************************************************
-- UBQS-REDUNDANCY-MIB  : Ubiquoss Redundancy MIB file
--
-- June 2013, Doyle Son
--
-- Copyright (c) 2013 by Ubiquoss, Corp.
-- All rights reserved.    
--
-- *****************************************************************
--

UBQS-REDUNDANCY-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    DisplayString,
    TimeStamp,
    TruthValue,
    PhysAddress
        FROM SNMPv2-TC
    ubiMgmtv2
        FROM UBQS-SMI
    InetAddress, 
    InetAddressType,
    InetAddressPrefixLength, 
    	FROM INET-ADDRESS-MIB
    InterfaceIndex,
    InterfaceIndexOrZero
        FROM IF-MIB;
  
  
ubiRedundancyMIB MODULE-IDENTITY
    LAST-UPDATED    "201306180000Z"
    ORGANIZATION 	"Ubiquoss Corp."
	CONTACT-INFO
		"	Ubiquoss
			Customer Service

		 Postal: 24F Milennium B/D,
		 	467-12, Dogok-Dong,
			GangNam-Gu, Seoul 135-270
			Korea

		   Tel: 82-2-2190-3100"     
    DESCRIPTION
        "The UBQS-REDUNDANCY-MIB is used to monitor
        and configure the redundancy appliances."
    ::= { ubiMgmtv2 29 }


-- ***********************************************************   
-- TEXTUAL-CONVENTION
-- Define the composed syntax 
-- ***********************************************************

RedundancyState ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Role states for redundancy.  Valid values are :
        	notConfigured      (1)   The appliance is not configured for redundancy.
        	active             (2)   The appliance is the active appliance.
        	standby            (3)   The appliance is warm standby mode         
        	activeLostStandby  (4)   The active appliance is not getting any 
									response from the standby appliance.
        "            
    SYNTAX          INTEGER  {      
    					notConfigured(1),
                        active (2),
                        standby (3),
                        activeLostStandby(4)
    }
              
FlashPath ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Represents 'copy <source> peer'."
    SYNTAX       INTEGER
    {
    	os1(0),
    	os2(1),
    	config(2)
    }

SwitchOverReason ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Role states for redundancy.  Valid values are :       
        	none				(0)    none of the following
        	lossConnWithActive  (1)    lost connection with active
        	forcedSwitchOver    (2)    Switchover occurs by force          
        	unknown             (3)    Switchover occurs by unknown reason
        "            
    SYNTAX          INTEGER  {                   
    					none(0),
                        lossConnWithActive (1),
                        forcedSwitchOver (2),
                        unknown (3)
     }

-- ***********************************************************
-- ubiRedundancyMIB
-- *********************************************************** 

ubiRedundancyMIBNotificationPrefix		OBJECT IDENTIFIER		::= { ubiRedundancyMIB 0 }
ubiRedundancyObjects					OBJECT IDENTIFIER		::= { ubiRedundancyMIB 1 }
ubiRedundancyPeerObjects				OBJECT IDENTIFIER		::= { ubiRedundancyMIB 2 }
ubiSwitchoverObjects					OBJECT IDENTIFIER		::= { ubiRedundancyMIB 3 }
ubiRedundancyMIBConformance				OBJECT IDENTIFIER	 	::= { ubiRedundancyMIB 4 }

-- ***********************************************************
-- ubiEntityAlarmMIBNotifications
-- ***********************************************************  
	ubiSwitchOverNotification NOTIFICATION-TYPE
    	OBJECTS    { 
    					ubiLastSwitchOverTime,
    					ubiLastSwitchOverReason,
    					ubiSwitchOverRedundancySyncState
    	}
    	STATUS          current
    	DESCRIPTION
        	"The agent generates this trap
        	 when a switchover occurs."
   		::= { ubiRedundancyMIBNotificationPrefix 1 }
                                                          
                                                          
	ubiRedundancyConnectionStateNotification NOTIFICATION-TYPE
    	OBJECTS     { 
    					ubiRedundancyConnectionState,
    	}
    	STATUS          current
    	DESCRIPTION
        	"The agent generates this trap
        	 when the connection state of standby appliance device is changed."
   		::= { ubiRedundancyMIBNotificationPrefix 2 }
   	
   	ubiRedundancySyncNotification NOTIFICATION-TYPE
    	OBJECTS     { 
    					ubiRedundancySyncState,
    	}
    	STATUS          current
    	DESCRIPTION
        	"The agent generates this trap
        	 when the synchronization process with standby SCU is done.
        	 This notification occurs after standby is connected."
   		::= { ubiRedundancyMIBNotificationPrefix 3 }
   		
	ubiRedundancySyncStateChangeNotification NOTIFICATION-TYPE
    	OBJECTS     { 
    					ubiRedundancySyncState,
    	}
    	STATUS          current
    	DESCRIPTION
        	"The agent generates this trap
        	 when the synchronization state has been changed."
   		::= { ubiRedundancyMIBNotificationPrefix 4 }
                                                          
-- ***********************************************************
-- ubiRedundancyObjects
-- *********************************************************** 

ubiRedundancy					OBJECT IDENTIFIER		::= { ubiRedundancyObjects 1 }

	ubiRedundancyReload OBJECT-TYPE
    	SYNTAX          INTEGER    	   
    	{   
    			both(1),
				peer(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Reload Active/Standby or Peer device."
    	::= { ubiRedundancy 1 }     
   
   ubiRedundancyMyRedundancyState OBJECT-TYPE
    	SYNTAX          RedundancyState
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The HA redundancy state of this appliance device."
      	::= { ubiRedundancy 2 }

    	
   ubiRedundancyConnStateNotificationEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Enable or disable redundancy connection state notification via SNMP."
    	::= { ubiRedundancy 4 }

    	
-- ***********************************************************
-- ubiRedundancyTable
-- *********************************************************** 
    	
	ubiRedundancyTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiRedundancyEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table keeps the current configuration of the redundancy 
        	 information of the active and standby units."
    	::= { ubiRedundancy 3 }


	ubiRedundancyEntry OBJECT-TYPE
    	SYNTAX          UbiRedundancyEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing redundancy information of the active and standby units"
    	INDEX           { ubiRedundancyIsActivePreferred  } 
    	::= { ubiRedundancyTable 1 }

	UbiRedundancyEntry ::= SEQUENCE {        
		ubiRedundancyIsActivePreferred				TruthValue,          
		ubiRedundancyState							RedundancyState,
		ubiRedundancyConnectionState				INTEGER, 
       }

 	ubiRedundancyIsActivePreferred OBJECT-TYPE
    	SYNTAX          TruthValue  
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This status indicates whether
        	 this appliance device is preferred to active or not.
        	 Commonly upper(or left) device has this value as True(1)
        	 and low(or right) device has this value as False(0). " 
    	::= { ubiRedundancyEntry 1 }
     
	ubiRedundancyState OBJECT-TYPE
    	SYNTAX          RedundancyState
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The HA redundancy state of the appliance device.
        	Role states for redundancy.  Valid values are :        
        	notConfigured      (1)   The appliance is not configured for redundancy.
        	active             (2)   The appliance is the active appliance.
        	standby            (3)   The appliance is warm standby mode         
        	activeLostStandby  (4)   The active appliance is not getting any 
									response from the standby appliance.
			"
    	::= { ubiRedundancyEntry 2 }   

     
	ubiRedundancyConnectionState OBJECT-TYPE
    	SYNTAX          INTEGER    
    	{
    		disconnect(1),
    		connect(2)
    	}
    	MAX-ACCESS      accessible-for-notify
    	STATUS          current
    	DESCRIPTION
        	"The HA redundancy connection state of standby appliance device."
    	::= { ubiRedundancyEntry 3 }   
    	
-- ***********************************************************
-- ubiRedundancySyncTable
-- *********************************************************** 
    	
	ubiRedundancySyncTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiRedundancySyncEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table keeps the information of the redundancy sync state
        	 of the active and standby units."
    	::= { ubiRedundancy 5 }
    	
    ubiRedundancySyncEntry OBJECT-TYPE
    	SYNTAX          UbiRedundancySyncEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing redundancy sync information of the active and standby units"
    	INDEX           { ubiRedundancyIsActivePreferred  } 
    	::= { ubiRedundancySyncTable 1 }

	UbiRedundancySyncEntry ::= SEQUENCE {        
		ubiRedundancySyncState					INTEGER,
		ubiRedundancySyncNotificationEnabled	TruthValue,
		ubiRedundancySyncStateChangeNotificationEnabled	TruthValue,
		}
	
	ubiRedundancySyncState OBJECT-TYPE
    	SYNTAX          INTEGER    
    	{
    		sync(1),
    		notSync(2)
    	}
    	MAX-ACCESS      accessible-for-notify
    	STATUS          current
    	DESCRIPTION
        	"The redundancy sync state of active appliance device for standby.
        	 This sync state is related with 'redundancy-check' function.
        	 ACTIVE periodically checks sync state with STANDBY using this function.
        	 Valid values are :
        	  sync      (1) synchronized with standby.
        	  notSync   (2) some mismatch occurs with standby."
    	::= { ubiRedundancySyncEntry 1 }
    	
	ubiRedundancySyncNotificationEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Enable or disable redundancy sync notification via SNMP."
    	::= { ubiRedundancySyncEntry 2 }

	ubiRedundancySyncStateChangeNotificationEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Enable or disable redundancy sync state change notification via SNMP."
    	::= { ubiRedundancySyncEntry 3 }

-- ***********************************************************
-- ubiRedundancyAddrTable
-- *********************************************************** 

	ubiRedundancyAddrTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiRedundancyAddrEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table keeps the current configuration of the address 
        	 information of the active and standby appliances. There is an
        	 entry in this table corresponding to each network interface
        	 that is configured for redundancy. Thus, the number of 
        	 entries in this table corresponds to the number of interfaces
        	 configured for redundancy."
    	::= { ubiRedundancyObjects 2 }


	ubiRedundancyAddrEntry OBJECT-TYPE
    	SYNTAX          UbiRedundancyAddrEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing address information for redundancy configuration
        	 on a network interface."
    	INDEX           { ubiRedundancyAddrIfIndex, ubiRedundancyAddrMyAddressType } 
    	::= { ubiRedundancyAddrTable 1 }

	UbiRedundancyAddrEntry ::= SEQUENCE {
		ubiRedundancyAddrIfIndex						InterfaceIndex,
		ubiRedundancyAddrMyAddressType					InetAddressType,
        ubiRedundancyAddrMyAddress						InetAddress,
        ubiRedundancyAddrPeerAddressType				InetAddressType,
        ubiRedundancyAddrPeerAddress					InetAddress
       }

   	ubiRedundancyAddrIfIndex OBJECT-TYPE
    	SYNTAX          InterfaceIndex
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The index value which uniquely identifies the interface
        	to which this entry is applicable."
    	::= { ubiRedundancyAddrEntry 1 }

  	ubiRedundancyAddrMyAddressType OBJECT-TYPE
    	SYNTAX          InetAddressType
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The type of address stored in ubiMyAddressType." 
    	::= { ubiRedundancyAddrEntry 2 }

	ubiRedundancyAddrMyAddress     OBJECT-TYPE
    	SYNTAX          InetAddress
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The IP address of the interface configured for this HA 
        	 configuration in this appliance. The type of this mib variable
        	 is defined in ubiMyAddressType.
        	 " 
    	::= { ubiRedundancyAddrEntry 3 }
  
	ubiRedundancyAddrPeerAddressType OBJECT-TYPE
    	SYNTAX          InetAddressType
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
       		"The type of address stored in ubiPeerAddressType" 
    	::= { ubiRedundancyAddrEntry 4 }     
    	
 	ubiRedundancyAddrPeerAddress   OBJECT-TYPE
        SYNTAX          InetAddress
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION   
        	"The IP address of the interface configured for this HA 
        	 configuration in the peer appliance. The type of this mib 
        	 variable is defined in ubiPeerAddressType. 
        	 "
        ::= { ubiRedundancyAddrEntry 5 }

-- ***********************************************************
-- ubiRedundancyPeerObjects
-- *********************************************************** 

ubiPeerSysInfo						OBJECT IDENTIFIER		::= { ubiRedundancyPeerObjects 1 }
ubiPeerResource						OBJECT IDENTIFIER		::= { ubiRedundancyPeerObjects 2 }
ubiPeerEnvironment					OBJECT IDENTIFIER		::= { ubiRedundancyPeerObjects 3 }
ubiPeerBootInfo						OBJECT IDENTIFIER		::= { ubiRedundancyPeerObjects 4 }

-- ***********************************************************
-- ubiPeerSysInfo
-- ***********************************************************
    
    ubiPeerSWVersion OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Software version of the peer HA system"
    	::= { ubiPeerSysInfo 1 }
    
    ubiPeerSerialNumber OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Serial Number of the peer HA system"
    	::= { ubiPeerSysInfo 2 }
    
    ubiPeerPhysicalAddress OBJECT-TYPE
    	SYNTAX          PhysAddress
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Peer's physical address."
    	::= { ubiPeerSysInfo 3 }

-- ***********************************************************
-- ubiPeerResource 
-- ***********************************************************

   	ubiPeerCpuFiveSec OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"%"
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"CPU busy percentage in the last 5 second period."
    	::= { ubiPeerResource 1 }
 
  	ubiPeerCpuOneMin OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"%"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"CPU busy percentage in the last 1 minute period." 
    	::= { ubiPeerResource 2 }

	ubiPeerCpuFiveMin     OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"%"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"CPU busy percentage in the last 5 minute period." 
    	::= { ubiPeerResource 3 }

   	ubiPeerMemoryAlloc OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"kbyte"
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Memory allocation usage."
    	::= { ubiPeerResource 4 }
 
  	ubiPeerMemoryFree OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"kbyte"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Memory free usage." 
    	::= { ubiPeerResource 5 }

	ubiPeerMemoryTotal     OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"kbyte"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"CPU busy percentage in the last 5 minute period." 
    	::= { ubiPeerResource 6 }
    
    ubiPeerMemoryFreePercentage     OBJECT-TYPE
    	SYNTAX          Counter32
    	UNITS        	"%"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"It indicates available memory allocation space in percentage."
    	::= { ubiPeerResource 7 }
    	
-- ***********************************************************
-- ubiPeerEnvironment
-- ***********************************************************

   	ubiPeerTemperature	OBJECT-TYPE
    	SYNTAX          Gauge32
    	UNITS        	"'C"
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"peer's current temperature."
    	::= { ubiPeerEnvironment 1 }

-- ***********************************************************
-- ubiPeerBootInfo
-- ***********************************************************
    ubiPeerNextBootImage	OBJECT-TYPE
    	SYNTAX			DisplayString
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Booting OS Image's name for peer unit
        	when setting this object, It should be specified the file name with path under /flash directory
        	and Peer's next booting mode will be Flash booting.
        	
        	Valid paths under /flash directory are :
        	 - os1/
        	 - os2/
        	
        	e.g) os1/BootImageName.Z
        	"
    	::= { ubiPeerBootInfo 1 }

ubiPeerImageModify							OBJECT IDENTIFIER		::= { ubiPeerBootInfo 2 }

-- ***********************************************************
-- ubiPeerImageCopyOrErase
-- ***********************************************************
    
    ubiPeerImagePath OBJECT-TYPE
    	SYNTAX			INTEGER    	   
    	{   
    		os1(1),   
    		os2(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"warning :  It operates for only Active unit, not Standby Unit.
        	
        	Path of the file that you want to copy or erase.
        	Represents 'copy (os1:|os2:) peer <FILENAME>' or
        	           'erase (os1:|os2:) peer <FILENAME>' CLIs.
        	for copy operation, path of Active unit and
        	for erase operation, path of Standby unit.
        	"
    	::= { ubiPeerImageModify 1 }
    
   	ubiPeerImageFileName OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"warning :  It operates for only Active unit, not Standby Unit.
        	
        	Name of the file that you want to copy or erase.
        	for copy operation, file name at Active unit and
        	for erase operation, file anme at Standby unit.
        	"
    	::= { ubiPeerImageModify 2 }

   	ubiPeerImageModifyOperate OBJECT-TYPE
    	SYNTAX			INTEGER    	   
    	{   
    		copy(1),      
    		erase(2)
    	}
    	MAX-ACCESS      write-only
    	STATUS          current
    	DESCRIPTION
        	"execute to copy or erase configurations."
    	::= { ubiPeerImageModify 3 }

-- ***********************************************************
-- ubiSwitchoverObjects
-- *********************************************************** 

ubiSwitchover						OBJECT IDENTIFIER		::= { ubiSwitchoverObjects 1 }

-- ***********************************************************
-- ubiSwitchoverInfo
-- *********************************************************** 

	ubiLastSwitchOverReason OBJECT-TYPE
    	SYNTAX          SwitchOverReason
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"Reason for the most recent switchover.
        	Valid values are :     
        	nont				(0)    none of the following
        	lossConnWithActive  (1)    lost connection with active
        	forcedSwitchOver    (2)    Switchover occurs by force
        	unknown             (3)    Switchover occurs by unknown reason"
    	::= { ubiSwitchover 1 }   
                 

 	ubiLastSwitchOverTime OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The local date and time when the last switchover event 
        	 occurred and was logged to the system. " 
    	::= { ubiSwitchover 2 }

    ubiSwitchoverNotificationEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"Enable or disable switchover notification via SNMP."
    	::= { ubiSwitchover 3 }
    
    ubiSwitchOverRedundancySyncState OBJECT-TYPE
    	SYNTAX			INTEGER    	   
    	{   
    		sync(1),
    		notSync(2)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The HA redundancy sync state of the appliance device after switchover.
        	Valid values are :
        	  sync      (1) SCU synchronization is done                      .
        	  notSync   (2) SCU synchronization is fail or still in progress.
        	  "
    	::= { ubiSwitchover 4 }


-- ***********************************************************
-- ubiRedundancyMIBConformance
-- ***********************************************************  

-- conformance information

ubiRedundancyMIBCompliance  OBJECT IDENTIFIER		::= { ubiRedundancyMIBConformance 1 }
ubiRedundancyMIBGroups  OBJECT IDENTIFIER			::= { ubiRedundancyMIBConformance 2 }


--
-- compliance statements
--
	ubiRedundancyMIBCompliances MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"An Redundancy-MIB implementation can implement this group to
        	provide Redundancy properties."
   	 	MODULE          -- this module
    	MANDATORY-GROUPS {
    					ubiRedundancyMIBRedundancyGroup,
    					ubiRedundancyMIBSwitchoverGroup,
    					ubiRedundancyMIBNotificationGroup
                        }

    	GROUP           ubiRedundancyMIBRedundancyGroup
    	DESCRIPTION
        	"The ubiRedundancyMIBRedundancyGroup must be implemented for
        	redundancy properties"
        GROUP           ubiRedundancyMIBSwitchoverGroup
    	DESCRIPTION
        	"The ubiRedundancyMIBSwitchoverGroup must be implemented for
        	switchover information"
    	GROUP           ubiRedundancyMIBNotificationGroup
    	DESCRIPTION
        	"The ubiRedundancyMIBNotificationGroup must be
        	implemented for redundancy and switchover that have notification"
    	::= { ubiRedundancyMIBCompliance 1 }

-- units of conformance

	ubiRedundancyMIBRedundancyGroup OBJECT-GROUP
    	OBJECTS         {
                    	}
    	STATUS          current
    	DESCRIPTION
        	"The collection of objects which are used to get the
        	operational state and redundancy state of the modules"
    	::= { ubiRedundancyMIBGroups 1 }
    	
    ubiRedundancyMIBSwitchoverGroup OBJECT-GROUP
    	OBJECTS         {
                    	}
    	STATUS          current
    	DESCRIPTION
        	"The collection of objects which are used to get the
        	operational state and redundancy state of the modules"
    	::= { ubiRedundancyMIBGroups 2 }

	ubiRedundancyMIBNotificationGroup OBJECT-GROUP
    	OBJECTS         {
                    	}
        STATUS          current
    	DESCRIPTION
        	"The collection of objects which are 
        	used to send a notification."
    	::= { ubiRedundancyMIBGroups 3 }    

END