-- ***********************************************************************************************
-- TN-DEV-SYS-IPMGMT-MIB.smi:  Transition Networks Enterprise MIB for TN device IP management feature
--
-- Copyright (c) 2012 by Transition Networks, Inc.
-- All rights reserved.
--
-- ***********************************************************************************************
--

TN-DEV-SYS-IPMGMT-MIB DEFINITIONS ::= BEGIN

IMPORTS
        DisplayString, RowStatus, TruthValue
                FROM SNMPv2-TC
        InetAddressType, InetAddress
                FROM INET-ADDRESS-MIB
    MODULE-IDENTITY,
    OBJECT-IDENTITY,
    entPhysicalIndex FROM ENTITY-MIB
    tnProducts FROM TRANSITION-SMI
    IpAddressOriginTC FROM IP-MIB
    InterfaceIndex FROM IF-MIB;

tnDevSysIpMgmtMIB MODULE-IDENTITY
    LAST-UPDATED "201208060000Z"
    ORGANIZATION "Transition Networks, Inc."
    CONTACT-INFO
                "       Transition Networks
                        Technical Support

                        10900 Red Circle Drive
                        Minnetonka, MN 55343 USA
                        Tel: +1-800-526-9267

                    E-mail: techsupport@transition.com"
    DESCRIPTION
        "The mib provides functionalities for managing the IP DHCP, IPv6 and DNS."

    REVISION      "201208070000Z"
    DESCRIPTION
        "Initial Revision of this module"
        ::= { tnProducts 10 }

tnDevSysIpmgmt            OBJECT IDENTIFIER ::= { tnDevSysIpMgmtMIB 1 }


tnIpMgmtTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF TnIpMgmtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Table to manage IP status for each device."
    ::= { tnDevSysIpmgmt 1 }

tnIpMgmtEntry OBJECT-TYPE
    SYNTAX TnIpMgmtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "An entry containing IP status for each device."
    INDEX   { entPhysicalIndex }
    ::= { tnIpMgmtTable 1 }

TnIpMgmtEntry ::=
    SEQUENCE {
       tnIpAddressMode          INTEGER,
       tnIpMgmtAccess           INTEGER,
       tnIpAddrType             InetAddressType,
       tnIpAddr                 InetAddress,
       tnSubnetMask             InetAddress,
       tnDefaultGateway         InetAddress
    }

tnIpAddressMode OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    notApplicable(0),
                    dhcp(1),
                    static(2),
                    bootpc(3),
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The status of DHCP client. The value of
                 notApplicable(0) indicating the device don't support DHCP client,
                 set this value to dhcp(1) to enable DHCP client,
                 set this value to static(2) to enable static ip.
                 set this value to bootpc(3) to enable bootp client"
    ::= { tnIpMgmtEntry 1 }

tnIpMgmtAccess OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    notApplicable(0),
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "(0)IP management access is not applicable.
                 (1)Enable IP management access.
                 (2)Disable IP management access.
                 Use this OID to Enable/Disable IP management access for the device."
    ::= { tnIpMgmtEntry 2 }

tnIpAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address type of the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnIpMgmtEntry 3 }

tnIpAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address of the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnIpMgmtEntry 4 }

tnSubnetMask OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The subnet the ipAddr belongs to."
    ::= { tnIpMgmtEntry 5 }

tnDefaultGateway OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The default gateway for the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnIpMgmtEntry 6 }

--
-- DNS Server
--
tnDnsServerTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF TnDnsServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table of DNS server.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnDevSysIpmgmt 2 }

tnDnsServerEntry  OBJECT-TYPE
    SYNTAX      TnDnsServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry in the table, containing inforamtion
                 about a DNS server."
    INDEX       { entPhysicalIndex, tnDnsServerIndex }
    ::= { tnDnsServerTable 1 }

TnDnsServerEntry ::= SEQUENCE
{
    tnDnsServerIndex       Integer32,
    tnDnsServerIPAddrType  InetAddressType,
    tnDnsServerIPAddr      InetAddress,
    tnDnsServerStatus      RowStatus
}

tnDnsServerIndex  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Index of DNS server table."
    ::= { tnDnsServerEntry 1 }

tnDnsServerIPAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address type of the DNS server.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnDnsServerEntry 2 }

tnDnsServerIPAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address of the DNS server.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnDnsServerEntry 3 }

tnDnsServerStatus  OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION "For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { tnDnsServerEntry 4 }

--
-- IP Extension table
--
tnIpextMgmtTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF TnIpextMgmtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table of IPv6 status."
    ::= { tnDevSysIpmgmt 3 }


tnIpextMgmtEntry OBJECT-TYPE
    SYNTAX TnIpextMgmtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "An entry containing IPv6 status for each device."
    INDEX   { entPhysicalIndex }
    ::= { tnIpextMgmtTable 1 }

TnIpextMgmtEntry ::=
    SEQUENCE {
       tnIpv6status              INTEGER,
       tnIpv6AddressLinklocal    InetAddress,
       tnIpv6Method              INTEGER,
       tnIpv6Addr                InetAddress,
       tnIpv6prefix              INTEGER,
       tnIpv6DupAddrDetected     INTEGER,
       tnIpv6GwMethod            INTEGER,
       tnIpv6defaultGW           InetAddress
     }

tnIpv6status OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "(1)enable IPv6
                 (2)disable IPv6
                 Use this OID to change the method of IP management access for the device."
    ::= { tnIpextMgmtEntry 1 }

tnIpv6AddressLinklocal OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Link-local IPv6 address"
    ::= { tnIpextMgmtEntry 2 }

tnIpv6Method OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    static(1),
                    dhcpv6(2),
                    stateless(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "(1)Static ip access, the default value is Static ip.
                 (2)dhcpv6 autoconfig.
                 (3)stateless autoconfig.
                 Use this OID to change the method of IP management access for the device."
    ::= { tnIpextMgmtEntry 3 }

tnIpv6Addr  OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Global IPv6 address"
    ::= { tnIpextMgmtEntry 4 }

tnIpv6prefix OBJECT-TYPE
    SYNTAX      INTEGER(1..128)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "IPv6 prefix value"
    ::= { tnIpextMgmtEntry 5 }

tnIpv6DupAddrDetected OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    true(1),
                    false(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "(1)true: duplicate address detected
                 (2)false: no duplicate
                 Use this OID to get the status of IPv6 address for the device."
    ::= { tnIpextMgmtEntry 6 }

tnIpv6GwMethod OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    static(1),
                    routeDisc(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "(1)static gateway address defined by ipv6defaultGW node.
                 (2)route discovery.
                 Use this OID to change the method of gateway address for the device.
                 Default value is static"
    ::= { tnIpextMgmtEntry 7 }

tnIpv6defaultGW OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "ipv6 default gateway address"
    ::= { tnIpextMgmtEntry 8 }

--
-- IPv6 Dynamic routes
--
tnIpv6DynRouteTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF TnIpv6DynRouteEntry
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "This entity's IPv6 dynamic routing table."
    ::= { tnDevSysIpmgmt 4 }

tnIpv6DynRouteEntry OBJECT-TYPE
    SYNTAX     TnIpv6DynRouteEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "A particular route to a particular destination.
           This table is specially for the result of route discovery
           which is needed for stateless auto-configuration feature."
    INDEX {
        tnIpv6DynRouteIndex
        }
    ::= { tnIpv6DynRouteTable 1 }

TnIpv6DynRouteEntry ::= SEQUENCE {
        tnIpv6DynRouteIndex        Gauge32,
        tnIpv6DynRouteDest         InetAddress,
        tnIpv6DynRoutePfxLen       Gauge32,
        tnIpv6DynRouteNextHop      InetAddress,
        tnIpv6DynRouteAge          Gauge32,
    }

tnIpv6DynRouteIndex OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "The Index value that identifies this route. "
    ::= { tnIpv6DynRouteEntry 1 }

tnIpv6DynRouteDest OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The destination IP address of this route."

    ::= { tnIpv6DynRouteEntry 2 }

tnIpv6DynRoutePfxLen OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Indicates the number of leading one bits that form the
            mask to be logical-ANDed with the destination address
            before being compared to the value in the
            tnIpv6DynRouteDest field."

    ::= { tnIpv6DynRouteEntry 3 }

tnIpv6DynRouteNextHop OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "On remote routes, the address of the next system en
            route.  For non-remote routes, a zero length string."
    ::= { tnIpv6DynRouteEntry 4 }

tnIpv6DynRouteAge OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The number of seconds since this route was last updated
            or otherwise determined to be correct.  Note that no
            semantics of 'too old' can be implied, except through
            knowledge of the routing protocol by which the route
            was learned."
    ::= { tnIpv6DynRouteEntry 5 }

--
-- Host to IP Table
--
tnHostToIpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TnHostToIpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table of host name to IP mapping."
    ::= { tnDevSysIpmgmt 7 }

tnHostToIpEntry OBJECT-TYPE
    SYNTAX      TnHostToIpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An entry in the table, containing inforamtion
                 about a host name mapping to an IP address."
    INDEX       { tnHostToIpIndex }
    ::= { tnHostToIpTable 1 }

TnHostToIpEntry ::= SEQUENCE
{
    tnHostToIpIndex    Integer32,
    tnHostIPAddrType   InetAddressType,
    tnHostIPAddr       InetAddress,
    tnHostName          DisplayString,
    tnAliasName        DisplayString,
    tnEntryStatus      RowStatus
}

tnHostToIpIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Index of DNS server table."
    ::= { tnHostToIpEntry 1 }

tnHostIPAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address type of the host.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnHostToIpEntry 2 }

tnHostIPAddr      OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address of the host."
    ::= { tnHostToIpEntry 3 }

tnHostName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..255))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The host name."
    ::= { tnHostToIpEntry 4 }

tnAliasName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The alias name of the host."
    ::= { tnHostToIpEntry 5 }

tnEntryStatus  OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION "For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { tnHostToIpEntry 6 }

tnIPv4MgmtTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF TnIPv4MgmtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Table to manage IP status for each device."
    ::= { tnDevSysIpmgmt 8 }

tnIPv4MgmtEntry OBJECT-TYPE
    SYNTAX TnIPv4MgmtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "An entry containing IP status for each device."
    INDEX   { tnIpv4Interface, tnIPv4Index }
    ::= { tnIPv4MgmtTable 1 }

TnIPv4MgmtEntry ::=
    SEQUENCE {
       tnIpv4Interface            InterfaceIndex,
       tnIPv4Index                INTEGER,
       tnIPv4ConfigMode           INTEGER,
       tnIPv4Origin               IpAddressOriginTC,
       tnIPv4AddrType             InetAddressType,
       tnIPv4Addr                 InetAddress,
       tnIPv4SubnetMask           InetAddress,
       tnIPv4DefaultGateway       InetAddress,
       tnIPv4Status               INTEGER
    }

tnIpv4Interface OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ifIndex for the IP interface."
    ::= { tnIPv4MgmtEntry 1 }

tnIPv4Index OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Index of server table."
    ::= { tnIPv4MgmtEntry 2 }

tnIPv4ConfigMode OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    dhcp(1),
                    static(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The status of DHCP client. The value of
                 set this value to dhcp(1) to enable DHCP client,
                 set this value to static(2) to enable static ip."
    ::= { tnIPv4MgmtEntry 3 }

tnIPv4Origin OBJECT-TYPE
    SYNTAX      IpAddressOriginTC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The origin of the address.
                For a detailed description of this type, please refer to IP-MIB.
                manual(2) indicates that the address was manually configured
                to a specified address, e.g., by user configuration.
                dhcp(4) indicates an address that was assigned to this
                system by a DHCP server.
                other(1) indicates that the dhcp is processing or failed"
    ::= { tnIPv4MgmtEntry 4 }

tnIPv4AddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address type of the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnIPv4MgmtEntry 5 }

tnIPv4Addr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address of the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnIPv4MgmtEntry 6 }

tnIPv4SubnetMask OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The subnet the ipAddr belongs to."
    ::= { tnIPv4MgmtEntry 7 }

tnIPv4DefaultGateway OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The default gateway for the device.
                 For a detailed description of this type, please refer to INET-ADDRESS-MIB."
    ::= { tnIPv4MgmtEntry 8 }

tnIPv4Status OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    active(1),
                    disabled(2),
                    renew(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "'Renew' restarts ipv4 interfaces the status changes to active/disable
                 depending on the success of the renew operation."
    ::= { tnIPv4MgmtEntry 9 }


--
-- IP Extension table
--
tnIPv6MgmtTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF TnIPv6MgmtEntry
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Table of IPv6 status."
    ::= { tnDevSysIpmgmt 9 }


tnIPv6MgmtEntry OBJECT-TYPE
    SYNTAX TnIPv6MgmtEntry
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "An entry containing IPv6 status for each device."
    INDEX   { tnIpv6Interface, tnIPv6Index }
    ::= { tnIPv6MgmtTable 1 }

TnIPv6MgmtEntry ::=
    SEQUENCE {
       tnIpv6Interface           InterfaceIndex,
       tnIPv6Index               INTEGER,
       tnIPv6Origin              IpAddressOriginTC,
       tnIPv6CfgMethod           INTEGER,
       tnIPv6AddressType         INTEGER,
       tnIPv6Prefix              InetAddress,
       tnIPv6PrefixLen           INTEGER,
       tnIPv6Address             InetAddress,
       tnIPv6RouterAddr          InetAddress,
       tnIPv6DupAddressDetected  INTEGER,
       tnIPv6Scope               INTEGER,
       tnIPv6MTU                 INTEGER,
       tnIPv6LinkMTU             INTEGER,
       tnIPv6Status              INTEGER
     }

tnIpv6Interface OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The ifIndex for the IP interface."
    ::= { tnIPv6MgmtEntry 1 }

tnIPv6Index OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Index of server table."
    ::= { tnIPv6MgmtEntry 2 }

tnIPv6Origin OBJECT-TYPE
    SYNTAX      IpAddressOriginTC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The origin of the address.
                For a detailed description of this type, please refer to IP-MIB.
                manual(2) indicates that the address was manually configured
                to a specified address, e.g., by user configuration.
                linklayer(5) indicates an address created by IPv6 stateless"
    ::= { tnIPv6MgmtEntry 3 }

tnIPv6CfgMethod OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    link-local(1),
                    stateless(2),
                    auto(3),
                    manual(4)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "(1)link-local.
                 (2)auto stateless.
                 (3)auto state.
                 (4) manual
                 Use this OID to change the method of IP management access for the device."
    ::= { tnIPv6MgmtEntry 4 }

tnIPv6AddressType  OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    anycast(1),
                    unicast(2),
                    multicast(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The address type of ipAddressPrefix."
    ::= { tnIPv6MgmtEntry 5 }

tnIPv6Prefix OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The prefix associated with the this interface."
    ::= { tnIPv6MgmtEntry 6 }

tnIPv6PrefixLen OBJECT-TYPE
    SYNTAX      INTEGER(1..128)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The length of the prefix (in bits)."
    ::= { tnIPv6MgmtEntry 7 }

tnIPv6Address  OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Global IPv6 address."
    ::= { tnIPv6MgmtEntry 8 }

tnIPv6RouterAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "ipv6 default router address."
    ::= { tnIPv6MgmtEntry 9 }

tnIPv6DupAddressDetected OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    true(1),
                    false(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "(1)true: duplicate address detected
                 (2)false: no duplicate"
    ::= { tnIPv6MgmtEntry 10 }

tnIPv6Scope OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    node(1),
                    link(2),
                    site(3),
                    organization(4),
                    host(5),
                    global(6)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Scope value used to limit the scope of the address.
                 unicast address only have scopes of link or global"
    ::= { tnIPv6MgmtEntry 11 }

tnIPv6MTU OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "MTU maximum transmission unit.  Size (in bytes) of the largest protocol data unit."
    ::= { tnIPv6MgmtEntry 12 }

tnIPv6LinkMTU OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Link MTU maximum transmission unit.  Size (in bytes) of the largest protocol data unit."
    ::= { tnIPv6MgmtEntry 13 }

tnIPv6Status OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    active(1),
                    disabled(2),
                    renew(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "'Renew' restarts ipv6 interfaces. Active sets the status to enabled
                 Disable sets the status to disabled."
    ::= { tnIPv6MgmtEntry 14 }
END
